GE LOGIQ A3 Basic Service Manual page 167

GE H
EALTHCARE
D 5213326-100, R
IRECTION
8-3-6 CA3-Keyboard Interface Cable (FRU P/N # 5192650)
Tools
8-3-6-1
• Common phillips screwdrivers
8-3-6-2 Needed Manpower
• 1 person, 30 minutes + travel
8-3-6-3 Preparations
• Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
8-3-6-4 Removal procedure
1. Remove LH Cover and RH Cover
2. Remove Left EMI Cover
3. Disconnect the Keyboard cable from BPB.
4. Remove Left & right arm rear covers
5. Remove Top Cover plastic by unfastening the 2 screws holding it
6. Cut the tie wraps in the arm cover
7. Remove keyboard back cover assembly
8. Remove Keyboard Assembly
9. Pull the Keyboard interface cable from the back side
8-18
Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 167 of 252
3
EVISION
Section 8-3 - Keyboard
LOGIQ™ A3 S M
ERVICE ANUAL