GE LOGIQ A3 Basic Service Manual page 78

GE H
EALTHCARE
D 5213326-100, R
IRECTION
Section 3-6 Network Connectivity
3.) Select "Internet Information Services" from Administrative tools.
4.) Double click on Internet Information Services. Select "FTP sites" under "local computer" of
"Internet Information Services" window.
Check for the "Default FTP site" state as "Running".
NOTE:
5.) Select the "Network Connection" from "Control Panel" to setup static IP Address. From
"Network Connections", select "Local Area Network".
The "Local Area Connection properties" window displays on the screen. Select "Internet Protocol
(TCP/IP)"-> "Properties". Select "Use the following IP Address" from Internet Protocol (TCP/IP)
properties.
Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 78 of 252
3
EVISION
Figure 3-3. Internet Information Services
Figure 3-4. FTP site
Default FTP site state as "Running" indicates that the system is ready for file transfer.
(cont'd)
Chapter 3
LOGIQ™ A3 S M
ERVICE ANUAL
3-21