GE LOGIQ A3 Basic Service Manual page 35

GE H
EALTHCARE
D 5213326-100, R
IRECTION
Table 1-4
LABEL/SYMBOL
~
1-6
Approv e d Docu m ent - 5213326-100TPH_r3.pdf Page 35 of 252
3
EVISION
Product Icons (Continued)
PURPOSE/MEANING
"OFF/Standby" Indicates the power off/standby
position of the power switch.
CAUTION
This Power Switch DOES NOT ISOLATE Mains
Supply
"Mains ON" Indicates the power on position of the
mains power switch.
CAUTION
This Power Switch DOES NOT ISOLATE Mains
Supply
"Protective Earth" Indicates the protective earth
(grounding) terminal.
Alternating Current
"Non-Ionizing Radiation" indicates that the system
applies RF energy.
Do not use the following devices near this
equipment, Cellular phones, radio transceivers,
mobile radio transmitters, radio controlled toy etc.
Use of these devices could cause this equipment to
perform outside the published specifications.
Keep power to these devices turned off when near
this equipment.
This Symbol indicates that waste electrical and
electronic equipment must not be disposed of as
unsorted municipal waste and must be collected
separately. Please contact an authorised
representative for manufacturer for information
concerning the decompositioning of your
requirement.
Section 1-3 - Important Conventions
LOGIQ™ A3 S
ERVICE
LOCATION
Adjacent to On-Off/Standby Switch
Rear of system adjacent to mains switch
Internal
Rear Panel, Circuit breaker label of Console and
Front Panel
Rear of console
Rear of console
Rear Panel
M
ANUAL