THOMSON Omnidrive Series Installation Manual page 159

A-10 TouchPad Instructions
Index Termination Parameter List for TouchPad
T A.8
ABLE
Display
Stop
NxtINow
NxtIWt
a. Parameters available only if the drive supports Indexing.
Home Type Parameter List for TouchPad
T A.9
ABLE
Display
Sns/Mrk
Marker
Sensor
a. Parameters available only if the drive supports Indexing.
Homing Auto-Start Parameter List for TouchPad
T A.10
ABLE
Display
Disable
Enb/Rst
Enable
a. Parameters available only if the drive supports Indexing.
Reverse Enable for Homing
T A.11
ABLE
Display
Inactive
Active
a. Parameters available only if the drive supports Indexing.
Digital Input Parameter List for TouchPad
T A.12
ABLE
Display
Not Asgn
DrvMode
IntInh
FolEnab
FwdEnab
RevEnab
CMD Ovrd
PreSelA
PreSelB
PreSelC
StrtInd
DefHome
Registr
CmdOfs
-
Home
FaltRst
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Parameter
Stop
Start another Index immmediately
Start another Index at next Start Index transition
Parameter
Home to Sensor, then to Marker
Home to Marker
Home to Sensor
Parameter
Auto-Start Homing inactive
Auto-Start Homing if not already Homed
Auto-Start on every Enable
Parameter
No reversing if started on Sensor
Reverse if started on Sensor
Parameter
Not Assigned (not used)
Drive Mode
Integrator Inhibit
Follower Enable
Forward Enable
Reverse Enable
Analog COMMAND Input Override
Preset Select Line A
Preset Select Line B
Preset Select Line C
Start Index
Define Home
Registration/Sensor
Remove Command Offset
Start Homing
Fault Reset
a
a
a
a