Perkins 900 Series Workshop Manual page 224

14
900 Series
To remove and to fit the drive belts Operation 14-3
1 Loosen the pivot fasteners (A2) of the alternator and the adjustment link fasteners (A1). Ensure that the
spacer between the link fastener and the timing case is not lost.
2 Release all of the tension from the belt and remove the belt.
3 Fit the new belt and adjust the tension, see Operation 14-2.
1
2
A
C0009
214 Workshop Manual, TPD 1345E, issue 3
This document has been printed from SPI². Not for Resale