Perkins 900 Series Workshop Manual page 15

900 Series
l Always use a safety cage to protect the operator when a component is to be pressure tested in a container
of water. Fit safety wires to secure the plugs which seal the hose connections of a component which is to
be pressure tested.
l Do not allow compressed air to contact your skin. If compressed air enters your skin, obtain medical help
immediately
l Turbochargers operate at high speeds and at high temperatures. Keep fingers, tools and items away from
the inlet and outlet ports of the turbocharger and prevent contact with hot surfaces.
l Do not clean an engine while it runs. If cold cleaning fluids are applied to a hot engine, certain components
on the engine may be damaged.
l Fit only genuine Perkins parts.
Workshop Manual, TPD 1345E, issue 3
This document has been printed from SPI². Not for Resale
1
5