Perkins 900 Series Workshop Manual page 118

6
900 Series
10 Fit the idler gear, see Operation 6-5.
11 Fit the camshaft , see Operation 6-15 together with the camshaft gear.
12 Fit the fuel injection pump, see Operation 11-15, Operation 11-17 or Operation 11-21.
13 Fit the gear for the fuel injection pump, see Operation 6-7 or Operation 6-9.
14 Ensure that the timing marks on the gears are correctly aligned.
15 Fit the timing case cover, see Operation 6-2.
16 Fit the coolant pump, see Operation 12-5.
17 Fit the crankshaft pulley, see Operation 5-1.
18 Fit the alternator bracket and the alternator, see Operation 14-3. Ensure that the belt tension is correct, see
Operation 14-2.
19 Fill the sump to the correct level with lubricating oil of the correct specification.
20 Fill the coolant system with coolant of the correct specification, see Operation 12-3.
Note: See "Coolant specification" in Chapter 5 of the User's handbook for details of the correct coolant to be
used in the cooling system.
108 Workshop Manual, TPD 1345E, issue 3
This document has been printed from SPI². Not for Resale