Signal Connections For Dn-8237-Pb - ICP DAS USA I-8092F Getting Started Manual

B.3.2 Signal Connections for DN-8237-PB
Maintaining signal connections is one of the most important factors in ensuring that your
application system is sending and receiving data correctly.
Pin Assignment for CON1
The I/O connector on the DN-8237-PB is a 37-pin connector that enables you to connect to the
PISO-PS200(or I-8092F) motion card. Fig. B3-2 shows the pin assignment for the 37-pin I/O
connector on the DN-8237-PB (or on the motion card), and refer to Table B3-2 for description of
each motion I/O signal.
Fig. B3-2 I/O connector pin assignment for the CON1
88
http://www.icpdas.com
I8092F Getting Started ManualVer.2.3