Table of Contents
Advertisement
B.2.2 Signal Connections for DN-8237-MB
Maintaining signal connections is one of the most important factors in ensuring that your
application system is sending and receiving data correctly.
Pin Assignment for CON1
The I/O connector on the DN-8237-MB is a 37-pin connector that enables you to connect to the
PISO-PS200 or I-8092F motion card. Fig. B2-2 shows the pin assignment for the 37-pin I/O
connector on the DN-8237-MB (or on the motion card), and refer to Table B2-2 for description of
each motion I/O signal.
Fig. B2-2 I/O connector pin assignment for the CON1
78
http://www.icpdas.com
I8092F Getting Started ManualVer.2.3
Advertisement
Table of Contents
