Exhaust System - Requirements; Computer - Requirements - Trotec Speedy 400 flexx Operation Manual

Exhaust System – Requirements
3.5
To guarantee the right ventilation during the engraving and cutting
process, an exhaust system with a minimum suction power of 300 m/h
is required.
The device must be equipped with a pre and fine dust filter as well as
an activated carbon filter (neutralization of smells).
Trotec advises to use the Atmos Duo Plus.
Connection - see section 3.7.3 Connecting the Exhaust System.
Do not start the machine without an adequate exhaust system.
Computer – Requirements
3.6
The following recommendation represents the minimum requirements.
When using a more powerful computer the graphics are generated and displayed
faster and the computing times and the data transfer to the laser are reduced. To
use the newest software version, you might have to abide other requirements.

Windows 7 32/64-bit or
Windows Vista 32/64-bit (with Service Pack 1 or later) or
Windows XP 32/64-bit (with Service Pack 2 or later)

Microsoft .NET framework 3.5

Adobe Reader 9.0 or later

Local administrative privileges (for required software installations)

GHz processor or faster

GB RAM or greater (Windows 7, Windows Vista) or

1 GB RAM or greater (Windows XP)

80 GB hard drive or larger

1024 x 768 resolution monitor or greater

true color graphics card (24-bit color depth)

1 free USB interface

CD-ROM drive

Mouse
8026 | V5.0_EN (11/2015)
Technical changes reserved
Trotec Laser GmbH
Page 21 of 62