Technical Data / Device Specification - Trotec Speedy 400 flexx Operation Manual

1.4

Technical Data / Device Specification

 Mechanics
Working area
Loading area
Max. height of work piece
Work piece table
Speed of motion system
Acceleration
Motor
Encoder
Lenses
Addressable accuracy
Repeatability
Accuracy to size of parts
Maximum material load
Exhaust
Standard Features
Options
 Options
Pass-through opening (back)
Rotary attachment
JobControl® Vision camera
Vacuum table
Honeycomb table
Black aluminum grid
Cutting table
 Control System
Software
Laser power
Interface hardware
Interface software
8026 | V5.0_EN (11/2015)
Technical changes reserved
1000 x 610 mm (39 x 24 in)
Up to 1090 x 690 mm x 305 mm (42.9 x 27.1 x 12 in) - depending on working
table; up to 1045 x ? x 185 mm (41 x ? x 7.2 in) - depending on working table,
with pass-trough
Up to 305 mm (12 in) depending on table configuration and lens
Flexible table design: engraving, vacuum and cutting table; aluminum grid;
computer controlled and programmable servo z-axis
355 cm/sec. (139 in/sec) CO2
200 cm/sec. (78 in/sec) fiber
4 g
Brushless DC servomotor
Increment measuring system
2.85" (standard); 1.5", 2.0", 2.5", 3.2", 4.0", 5.0" (optional)
5µm
< 0,015 mm (0.0006 in)
According to material an process
20 kgs (55 lbs) area load over the whole working area
Table exhaust via rear of engraving cabinet
Harsh environment protection kit, Ergonomic access to working area, electro-
optic autofocus, laserpointer (655nm, <0,99mWcw), coaxial air assist (without
pump), 2.85" lens (can be exchanged free of charge with 1.5", 2.0", 2.5", 3.2",
4.0", 5.0" lens), trolley base, one working table of choice (vacuum or cutting
table, black aluminum grid or engraving table), USB connection, JobControl X
Expert software
Pass-through opening (back), rotary attachment, air assist including
compressor, temperature sensor, laser power upgrade, vacuum table, engraving
table, black aluminum grid, cutting table (lamellas), honeycomb table, white
plastic cutting grid
Height/width: 185 x 1045 mm (7.2 x 41 in)
maximum material height 185 mm (7.2 in)
Cones, roller or combined version; tiltable
JobControl® Vision Vision; max. working area: 1000 x 610 mm (39.3 x 24 in)
Engraving via JobControl with camera attached: 975 x 600 mm (38.3 x 23.6 in)
Vacuum effect for thin or corrugated materials
In combination with vacuum table
For reflection-free cutting of small objects
Removable aluminum lamellas
JobControl X Expert
Adjustable 0 - 100%
USB, RS-232 (RS-232 mandatory for TroCAM and JobControl® Vision)
ASCII, HPGL, JobContro
Trotec Laser GmbH
Page 7 of 62