Set The Cleaning Steps - Agena BIOSCIENCE MassARRAY Nanodispenser RS1000 User Manual

Set the cleaning steps

1. Tap the cleaning tab of the Method screen.
Figure 3.14 Method Screen – Cleaning Tab
First step in the
cleaning
sequence
Last step in the
cleaning
sequence
2. Tap to select steps in the cleaning sequence
check box next to the step.
NOTE
It is recommended that you do not skip any cleaning steps unless instructed to do so by a Agena
Bioscience Customer Support representative.
Figure 3.15 shows the deck components that perform the cleaning steps.
Figure 3.15 Deck Components and Cleaning Steps
Ultrasonic wash
MassARRAY® Nanodispenser RS1000 v2.1 User Guide
For Research Use Only. Not for use in diagnostic procedures.
Chapter 3 Methods and Mappings
(Figure 3.14). To skip a step, remove the
Rinse station Dry station
69
USG-CUS-059 Rev05