Loading A Method - Agena BIOSCIENCE MassARRAY Nanodispenser RS1000 User Manual

Chapter 2 Dispensing to SpectroCHIP Arrays
32

Loading a method

A method file specifies dispensing run settings, such as the mapping file, pin cleaning
operations to perform, and speed at which the pin array moves.
The instrument includes predefined method files for some common types of dispensing.
You can also create custom method files. See
creating custom method files.
To load a method file:
1. Go to the Main Menu (tap the BACK button
2. Tap TRANSFER on the Main Menu.
NOTE NOTE
Do not tap the OPEN button
Figure 2.14 Main Menu and Transfer Screen
3. On the Transfer screen, tap METHODS
screen.
Figure 2.15 Transfer Screen and Method Screen
4. Select a method file in the list that appears by tapping the file name
MassARRAY® Nanodispenser RS1000 v2.1 User Guide
For Research Use Only. Not for use in diagnostic procedures.
Chapter 3, page 63
on any screen).
on the Transfer screen as it will cause a calibrant velocity error.
, then tap OPEN
for more details on
on the Method
(Figure 2.16).
USG-CUS-059 Rev05