Volume Out Of Range Warning; Sending Sample Tracking Data; Vision Tab - Agena BIOSCIENCE MassARRAY Nanodispenser RS1000 User Manual

Volume out of range
warning
Sending sample
tracking data

Vision tab

The Vision tab (Figure 2.51) shows a photo of the pads and the dispense volumes for
each during dispensing. (It also shows the SpectroCHIP Array alignment and barcode
checking prior to dispensing; see
Figure 2.51 Transfer Screen (Vision Tab) During Transfer
AA
If Volume Check is enabled (see
at the end of the run if any dispsenses were out of the range specified (see
for troubleshooting information. Tap OK to exit the warning screen.
See Appendix D
Figure 2.52
AA
If sample tracking is enabled for this run, the data is sent to the MassARRAY Transfer
Server at the end of the dispensing run. A text file is generated for each SpectroCHIP
Array.
MassARRAY® Nanodispenser RS1000 v2.1 User Guide
For Research Use Only. Not for use in diagnostic procedures.
Chapter 2 Dispensing to SpectroCHIP Arrays
page 50.)
page 35, steps 3 and 4), a warning message will appear
53
Figure 2.52).
USG-CUS-059 Rev05