Agena BIOSCIENCE MassARRAY Nanodispenser RS1000 User Manual page 27

Figure 2.6 Prompt to Save the Configuration File
YES  Saves the current instrument configuration to the DispenseCONFIG.xml file.
The parameters in the configuration file are applied at the next instrument startup. It
is usually recommended that you save the configuration file so that the instrument
uses the last configuration parameters.
If you are unsure whether parameter changes were made, or if unintentional changes
were made, press NO. The last known (and most probably good) settings will be
reloaded at the next program start.
NO The current configuration is not saved. The configuration parameters that were
last saved to the DispenseCONFIG.xml file will be used the next time the instrument
is powered on.
MassARRAY® Nanodispenser RS1000 v2.1 User Guide
For Research Use Only. Not for use in diagnostic procedures.
Chapter 2 Dispensing to SpectroCHIP Arrays
25
USG-CUS-059 Rev05