Agena BIOSCIENCE MassARRAY Nanodispenser RS1000 User Manual page 25

Logging off
NOTE NOTE
If a user name and password has not yet been assigned, use the pre-installed user name
"researcher" and password "researcher". Note that user names and passwords are case sensitive.
See page 26 for more details on creating user names and passwords.
1. Tap the type your name box on the Login screen.
Figure 2.3 Login Screen
2. In the keyboard that appears, type your user name, and tap enter.
NOTE NOTE
To cancel the keyboard, tap the
3. On the Login screen, tap the password box.
4. In the keyboard that appears, type the password for the user name, and tap enter.
5. On the Login screen, tap the LOGON button.
6. If a warning message appears
are valid. (See Table 2.2
7. Tap OK to dismiss the message and return to the Login screen.
Figure 2.4 Warning Screen
If you choose to log off, you must log on again to access the control software.
MassARRAY® Nanodispenser RS1000 v2.1 User Guide
For Research Use Only. Not for use in diagnostic procedures.
Chapter 2 Dispensing to SpectroCHIP Arrays
in the upper right corner.
(Figure 2.4), confirm that the user name and password
for default user logins.)
23
USG-CUS-059 Rev05