Baumuller BUS 6-T Series Technical Description And Operations Manual page 78

Parameters
Parameter description
These parameters display internal values of the controller.

actual position value
The actual position value displayed refers to the ROD encoder in the motor. 0 corresponds
to the position of the reference signal after completion of the reference run.



 hardware version
software version
These parameters display the hardware or software version of the controller used.
The software version contents 2 groups of figures
Example:
incompatible software version
compatible software version
Incompatible software version means, the new software isn´t able to read the data sets in
the EEprom. Before the software is changed, the data from the EEprom has to be stored on
disk or noted by hand.
An incompatible software e.g. originates from a new ID no. (additionally the file
PCBASS.CFG must be supplemented by this number, see manual operation software).
Compatible software version means, the software is enlarged with additional functions or is
changed for customer, without needing a new ID no.



 error bar of I/O component boot
boot initialisation error
If an error occurs during the controller's boot procedure, this error bar is activated and
controller enabling is not possible (controller inhibit).
See chapter 7.2.1 Error messages.
72
Display and measuring parameters
01 02
5.94017.06
Controller BUS 6 T
Baumüller Nürnberg GmbH