Baumuller BUS 6-T Series Technical Description And Operations Manual page 42

Commissioning
WARNING
Control cabinets must be furnished with emergency stop buttons by which all potentially dangerous
voltages may be de-activated. Excluded from this are operating media, through whose de-activation a
new hazard may arise. The trigger for the emergency stop should be incorporated in such a way that,
in the event of an emergency, it may be reached as soon as possible. Procedures involving a
conderably greater danger necessitate the precence of an additional person.
The user is to ensure that no unauthorised persons work on the machine.
The user is obliged to immediately report any changes which may affect the safety of the machine.
On dismantling safety equipment during commissioning, repair and maintenance, the machine is to
be shut down exactly according to instructions. After completion of commissioning, repair and
maintenance work the safety equipment is to be reinstalled immediately.
This list does not cover all necessary measures for the safe operation of the unit. If further
information is required or if setial problems arise, please contact BAUMÜLLER NÜRNBERG ar a
retail outlet.
Comply with the warning notes in chapter 1 of the operational manual.
NOTE
The operator must be electrostatically discharged directly before handling the modules, to protect
them from high voltages which result from electrostatic charge. This can be achieved by simply
touching a conductive, grounded object.
Equipment with components or modules likely to be damaged by electrostatic charge are marked by a
sticker in a visible spot.
36
Controller BUS 6 T
Baumüller Nürnberg GmbH
5.94017.06