Led Control - TRENDnet TEW-826DAP User Manual

TRENDnet User's Guide

LED Control

Management > LED Control
1. Log into your management page (see
8).
2. Click on the Management tab and click LED Control.
3. Review the settings and click Save to save settings.

Power LED: Select ON to leave Power LED on or OFF option to turn off.

LAN LED: Select ON to leave LAN LED on or OFF option to turn off.

2.4GHz LED: Select ON to leave wireless 2.4GHz LED on or OFF option to
turn off.

5GHz1 LED: Select ON to leave wireless 5GHz1 LED on or OFF option to
turn off.

5GHz2 LED: Select ON to leave wireless 5GHz2 LED on or OFF option to
turn off.
4. Click on the Save button then click on the flashing Apply/Discard button
located on the top left section, and click Save & Apply to apply the settings.
Note: Your configurations are not saved and applied until you click on Apply/Discard
Changes button. The Save & Apply step saves and applies all configuration changes.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access the management page" on page
TEW-826DAP
52