Table of Contents
Advertisement
TRENDnet User's Guide
SSH Management
Management > SSH Management
SSH (Secure SHell) is a form of a CLI (Command Line Interface), a user interface where
commands can be sent to the access point in the form of successive lines of text
(command lines).
1. Log into your management page (see
8).
2. Click on the Management tab and click SSH Management.
3. Select ON and click Save to save settings.
4. Click on the Save button then click on the flashing Apply/Discard button
located on the top left section, and click Save & Apply to apply the settings.
Note: Your configurations are not saved and applied until you click on Apply/Discard
Changes button. The Save & Apply step saves and applies all configuration changes.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access the management
page" on page
Log
Management > Log
1. Log into your management page (see
8).
2. Click on the Management tab and click Log. Click apply to save settings
Enable System log: Select option to enable system log feature
Syslog Server IP Address: Enter the IP address of the syslog server
Local Log: Select enable to enable local log feature
3. Click on the Save button then click on the flashing Apply/Discard button
located on the top left section, and click Save & Apply to apply the settings.
Note: Your configurations are not saved and applied until you click on Apply/Discard
Changes button. The Save & Apply step saves and applies all configuration changes.
TEW-826DAP
"Access the management
page" on page
50
Advertisement
Table of Contents
