Client Bridge: Scan For Wireless Networks - TRENDnet TEW-826DAP User Manual

TRENDnet User's Guide

Wireless Mode: Select the wireless mode to set on the selected wireless
band in client bridge mode

SSID: Manually enter the wireless network name (SSID) you want to
establish connection. Or simply click on Site Survey to scan for available
wireless network (more details below).

Preferred BSSID: Click option and enter the preferred wireless network
you would like to connect to.

Security Mode: Select from the pull-down menu the wireless security that
is used on the wireless network you would like to connect to.
© Copyright 2018 TRENDnet. All Rights Reserved.

Client Bridge: Scan for wireless networks

Wireless (2.4GHz, 5GHz1, or 5GHz2) > Wireless Network
This section outlines the available features to configure for the wireless 2.4 GHz and
5GHz bands when Client Bridge mode is selected.
1. Log into your management page (see
8).
2. Click on the wireless band you would like to configure and click Wireless
Network.
3. Under SSID section click Site Survey to wirelessly scan for available wireless
networks.
TEW-826DAP
"Access the management page" on page
36