Management Vlan - TRENDnet TEW-826DAP User Manual

TRENDnet User's Guide

Management VLAN

Management > Management VLAN
1. Log into your management page (see
8).
2. Click on the Management tab and click Management VLAN.
3. Review the settings for the 2.4G and both 5G profiles and click Save to save
settings.

Enable: Check box of the selected SSID to enable VLAN feature

VID: Enter the VID to assign on the selected wireless network

SSID: Displays the available SSID

WiFi Security: Displays the wireless security type of the wireless network
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access the management page" on page 
No VLAN Tag: Select this option to use no VLAN Tag

Specified VLAN ID: Select this option and enter the assigned VLAN ID.
4. Click on the Save button then click on the flashing Apply/Discard button
located on the top left section, and click Save & Apply to apply the settings.
Note: Your configurations are not saved and applied until you click on Apply/Discard
Changes button. The Save & Apply step saves and applies all configuration changes.
TEW-826DAP
44