Table of Contents
Advertisement
TRENDnet User's Guide
Repeater
Repeater: Wireless Network
Wireless (2.4GHz, 5GHz1, or 5GHz2) > Wireless Network
This section outlines the available features to configure for both wireless 2.4GHz and
5GHz when Repeater mode is selected.
1. Log into your management page (see
8).
2. Click on System, and select Operation Mode.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access the management
page" on page
3. Enable Repeater under the wireless band (2.4GHz or 5GHz) you would like to
connect this access point to, then press Save. Please make sure that the
selected band is available on your network.
4. Click on the wireless band (Wireless 2.4GHz / Wireless 5GHz) you would like to
configure and click Wireless Network.
TEW-826DAP
39
Advertisement
Table of Contents
