TRENDnet TEW-826DAP User Manual page 23

TRENDnet User's Guide

Single password – Requires users to enter a single password to connect
your captive portal WiFi network which must be defined in the Setting
Single Password settings.
o
To specify a single password, next to Setting Single Password,
enter the new password or click Generate to randomly generate a
new password.

Both – Users can enter either a user name and password or single
password to connect to your captive portal WiFi network. Both prompts
will be displayed on the captive portal page and user can select either
method to authenticate.

Next, specify the Authentication Timeout settings. This is the session time
period (minutes) which users are allowed to be logged in to your wireless
network. Once the time expires, users will automatically logged and will
need to log back in through the captive portal page again in order to
reconnect to your wireless network. It is recommended to set a value to
ensure authentication sessions are closed after a certain time period.
Setting the value to 0 minutes allows users to be authenticated and
connected to your captive portal WiFi network without any time
restrictions.
Click Save when you have completed these settings.
© Copyright 2018 TRENDnet. All Rights Reserved.

After your users authenticate and connect to your captive portal WiFi
network, you may want to redirect your users to a specific URL, address, or
website for advertisement purposes.
To enable this feature on your captive portal WiFi network, click the Redirect drop-
down and select Enable. Enter the URL/address/website in the field Redirect URL. Click
Save at the bottom of the page to save the settings.
Note: The prefix http:// or https:// must be included when entering
URLs/addresses/websites (ex. https://www.trendnet.com)
After you have defined the initial parameters, you can apply portal page customization.
Under Upload Image File, click Browse or Choose File depending on your browser, and
navigate to the directory where the selected image is located and select the image.
Once you have selected the image, click Upload.
TEW-826DAP
20