Gsa It Security Mode; Backup And Restore - Acuity Controls nLight ECLYPSE User Manual

ECLYPSE Web Interface

GSA IT Security Mode

In the FIPS 140-2 menu, you can enable or disable the General Services Administration (GSA) IT Security mode. It is
mandatory to enable this option for all U.S. General Services Administration Federal Government buildings.
Figure 72: GSA IT Security Mode
Enabling this option will authorize only TLS1.2 encrypted communication and display a warning banner when connecting to
the Web server. A confirmation message is displayed to ensure that you really want to enable/disable the GSA IT Security
Mode.
When enabling or disabling the GSA IT Security mode, the Web server will be restarted.

Backup and Restore

The Backup and Restore tab allows you to fully backup and restore the ECLYPSE controller such as the settings, exten-
sions firmware, ENVYSION project, etc. The backup file is created on an ECLYPSE controller and can then be down-
loaded to the PC using the download option. The backup file can also be created on a USB key and then restored in a
controller.
The backup file for an ECLYPSE controller can only be created on a FAT32-formatted USB flash drive.
The Backup and Restore window, shown below, is used to create a backup as well as import and restore a backup. When
a backup is created, the file appears in the list as shown in the following figure.
Figure 73: System Settings - Backup and Restore
nLight ECLYPSE
75