Sso Client Settings - Acuity Controls nLight ECLYPSE User Manual

ECLYPSE Web Interface
An SSO server must be configured with a static IP address. If the SSO server IP address changes, you will have to reconfigure all SSO
clients with the new IP address. See Ethernet.
Figure 53: SSO Server Settings
Item
Server Mode (On/Off)
Type
Access Token
Apply
See also Setting Up the SSO

SSO Client Settings

The Client Settings tab allows you to select the type of client mode for the Client controller(s). When Type is set to Single
Sign On (SSO), the controller will use the SSO server for authentication.
Figure 54: Client Settings - Type
When Type is set to Local, credentials are added to and managed by this controller.
nLight ECLYPSE
Description
Enable or disable the functionality of the server. When set to OFF, the controller is no longer in server mode.
Server type
Identifier used by the server that is handling the protected resource to lookup the associated authorization information.
The access token is usually a long string made up of 16 to 132 random alphanumeric characters and symbols that would
be difficult to guess.
When the SSO service is selected, the access token ID is displayed by default. If required, you can generate a new code
using the generate icon or manually enter an access token.
Click to copy the access token to the clipboard.
Click to refresh the information in the list.
Click Apply to apply and save the changes
Functionality.
60