Acuity Controls nLight ECLYPSE User Manual page 61

Figure 55: Client Settings - SSO
Item Description
Type Server type
Server IP address of the SSO server. This is the IP address of the ECLYPSE controller that was configured as the server.
Server IP Address
Note: An SSO server must be configured with a static IP address. If the SSO server IP address changes, you will have to
reconfigure all SSO clients with the new IP address. See Ethernet.
Server Https Port Server HTTPS port of the SSO server. By default, this port is set to 443.
Server access token of the SSO server. If the server access token changes, this parameter should be updated by the user
accordingly.
Access Token
In the Access Token field, enter the access token belonging to the Server. To do so, go to Server Settings, copy the access
token using the copy icon
Define a recovery password to access the controller in recovery mode if ever the server is unavailable. See
(SSO)
Recovery Password /
Click the show password icon
Confirm Recovery
Password
reset will be required.
Click to copy the access token to the clipboard.
Click to refresh the information in the list.
Apply Click Apply to apply and save the changes.
nLight ECLYPSE
and paste (CTRL+V) into the Access Token field in Client Settings.
Troubleshooting.
In order for the recovery to work, we highly recommend you do not forget your recovery password. If so, a factory
to see the password you are entering.
ECLYPSE Web Interface
Single Sign On
61