Eclypse Services That Require Internet Connectivity - Acuity Controls nLight ECLYPSE User Manual

Service Default Port
Number (Protocol)
Radius Server 1813 (UDP)
Radius Server 1814 (UDP)
BACnet/IP 47808 (UDP)
MQTT 8883 (TCP)
zeroconf 5353 (UDP)
Unknown 5551 (TCP)
Echo 7 (UDP)
Rplay 5555 (UDP)
Freeciv 5556 (UDP)
Unknown 33312 (UDP)
Unknown 39631 (UDP)

ECLYPSE Services that Require Internet Connectivity

In order to operate, the following out-bound services require:
A working DNS. See
£
The default gateway / router to be configured. See
£
Internet connectivity.
£
The corresponding default out-bound port number is also shown.
Service
SMTP
Network Time Protocol (NTP)
DNS server
nLight ECLYPSE
Description
Accounting Port: This is the port on which accounting requests are
made. This is only used to receive accounting requests from other
RADIUS servers.
Proxy Port: This is an internal port used to proxy requests between
a local server and a remote server.
The BACnet over IP protocol.
Secure MQ Telemetry Transport. This is an internal port that
facilitates communication with the nLight Gateway.
This is an internal port used to access a device through the
hostname.
System configuration (inbound/outbound)
Device identification on local subnet
Device identification on local subnet
nLight Protocol over IP
Domain Name System (DNS).
Default Port Number (Protocol)
25 (TCP)
123 (UDP)
53 (UDP, TCP)
Default Gateway.
Description
Outgoing Email server port number
Used to set the controller's real-time clock
Used to provide URL name resolution. The controller by default
uses an internet DNS. If the local network has a DNS, set its IP
address in Network
IP Network Protocols and Port Numbers
Where can this port
number be changed?
See User Management.
See BACnet Settings.
Settings.
19