Wi-Fi Access Point - Acuity Controls nLight ECLYPSE User Manual

Wi-Fi Access Point

Should there be no available access point; an ECLYPSE controller can be configured as a wired-to-wireless bridge to cre-
ate an access point which can provide Wi-Fi access to other Wi-Fi enabled clients. This access point operates off of the
same subnetwork and has the same IP connectivity that the controller has with its wired network connection. The Wi-Fi
adapter can also be temporarily added to a controller for wireless commissioning purposes. A variety of software applica-
tions are available for system monitoring and override, commissioning, configuration and programming. To configure the
Wi-Fi access point connection mode, see
Wi - Fi Access Point:
Use the Controller to Provide Wi - Fi Access to other Wireless Devices
Internet
DHCP Server
Figure 18: Using an ECLYPSE Controller to Create an Access Point
A second ECLYPSE controller can be configured as a wireless client. This can be used as a solution to 'jump' architectural
features that are not compatible with wires such as glass atrium and the like. To configure the Wi-Fi client connection
mode, see Setting up a Wi-Fi Access Point Wireless
An access point can provide Wi-Fi access to other Wi-Fi enabled clients and controllers.
Controller-to- Controller Interconnection :
Use Wi - Fi to Wirelessly Connect other Controllers
Eliminate Ethernet Cables
Figure 19: Using an ECLYPSE Controller as a Wireless Bridge
nLight ECLYPSE
Setting up a Wi-Fi Access Point Wireless
Router
Wired- to - Wireless
Bridge
Wireless Access Point
Internet
Router
Wired - to-
Wireless Bridge
Wireless Access Point
Network.
Controller Interconnection
Through Wi - Fi
Connecting IP Devices to an IP Network
Network.
SiteView Energy
Web Browser
Sensor View
29