Table of Contents
Advertisement
7. Click Import.
8. Click Next.
9. Browse to the Downloads folder and select the certificate file (.crt) that was previously downloaded.
10. Click Next throughout the next windows and then click Finish.
11. A warning message is displayed. Click Yes to continue and apply the certificate.
12. Close all Google Chrome windows for the changes to be applied.
When restarting the Web browser, you will no longer get a message stating that your connection is NOT secure, but rather
a Secure
green padlock icon will appear in the URL bar to indicate a secure connection.
System Settings
This is where you configure the controller's date and time, Web interface, port numbers, secure web interface, and the li-
cense. A secure web interface requires a SSL certificate.
Device Information
This shows detailed information about the controller such as the firmware version, MAC address for each network inter-
face, extension modules versions, and Wi-Fi information.
Figure 60: General Device Information
Item
Description
The controller's firmware can be updated through the Firmware Update file upload interface. See
Update
Also see Extensions.
Click to reboot the controller.
Reboot
Note: Rebooting the controller will interrupt the operation of any connected equipment and the controller will be offline from the
network for the duration of the reboot.
Export an audit log in .csv format showing auditable events such as account logins, event ID and description, event type, etc.
Export Audit Log
See
nLight ECLYPSE
Export Audit Log
for more information.
ECLYPSE Web Interface
Updating the
Firmware.
65
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the nLight ECLYPSE and is the answer not in the manual?