Vesa-Mount Installation - Barco Nio Fusion 4MP Getting Started Manual

Vesa-mount installation

Important:
• Use an arm that is approved by VESA (according to the VESA 100
mm standard).
• Use an arm that can support a weight of at least 20 kg (44.10
lbs).
To attach the panel unit to an arm stand:
Release the display panel from the display stand. Therefore, (1)
1.
press the panel release button at the rear of the panel (not visible
on the drawing below). Next, (2) pull the panel forward and (3)
lift it from the stand.
Attach the panel firmly to the arm stand using 4 screws M4 x 10
2.
mm.
You can mount the panel in landscape position or portrait position.
3.
When mounted in landscape position, the BARCO logo must be
Vesa-mount installation
29