Vesa-Mount Installation - Barco Nio 5MP LED User Manual

2. Installation
5. Route all cables through the cable duct in the stand of your display. For better strain-relief and shield-
ing of the cables, fix the cables with the cable straps at the inside of the connector compartment.
Image 2-8
6. Close the connector compartment cover. You will hear a "click" sound when the cover is in position.
Image 2-9
7. Connect the external DC power supply to a grounded power outlet by using one of the power cables
included with the display.
2.3

VESA-mount installation

C
AUTION
W
ARNING
itself. Instead, make sure that the arm is equipped with a VESA approved handle and
use this to move the display.
Please refer to the instruction manual of the arm for more information and instructions.
10
:
Use suitable mounting apparatus to avoid risk of injury.
:
Never move a display attached to an arm by pulling or pushing the display
K5902121 NIO 5MP LED DISPLAY 18/01/2018