General Tips - Barco Nio Fusion 4MP Getting Started Manual

General tips

General tips
• If one display from a multi-head system exhibits problems, try
to eliminate the problem by switching video cables or power
supplies. In that way you can find out if the problem resides in
the display or not.
Configuring the Windows desktop
Note: In order to configure the Windows Desktop of your N
F 4MP you must be logged in using an account with
USION
administrator privileges.
If you are using a color display in conjunction with your Barco grayscale
display(s) or you should configure your desktop before setting the
resolution of the your Barco grayscale display(s).
Note: If you are using Barco Coronis Color displays and have
selected the one of the two Static Gray palette modes for them,
you should follow these guidelines also.
Recommended Configuration
The recommended configuration for best grayscale image quality when
using a color display in conjunction with your high-resolution grayscale
display(s) is to set the color display as the primary monitor of the
Windows desktop. Then set the colors setting on the "Settings" tab of
the Windows Display Control Panel to the highest possible color depth
(e.g. 32 bits-per-pixel "true color") supported by the color display's
controller.
The colors setting for your high-resolution grayscale displays should
default to 256 colors (8 bits per pixel). You should set the palette mode
for the your high-resolution grayscale displays to Static Gray palette
with NO system colors. This guarantees that the all of the 256 gray
levels available for GDI graphics will be present. This also eliminates the
36
IO