Barco Nio Fusion 4MP Getting Started Manual page 39

Hide thumbs Also See for Nio Fusion 4MP:

Table of Contents

General tips

To set the resolution of the second display attached to the

BarcoMed display controller you are working with, go back to the

"Settings" tab of the "Display Properties Control Panel". If

necessary attach the second display you detached in step 2 above,

by right clicking on the rectangle that represents it and selecting

Attached.

Now repeat steps 5-8 above for this display.

If you are using a Quad-Head Configuration repeat all of the above

steps for the two displays on the second display controller.

Note: If you have a single display configuration and you have

enabled DualView, Windows will not allow you to attach the

second head. This is normal and not a bug.

After enabling DualView and setting the resolutions in a Quad-

Head Configuration you may need to drag the heads into the

proper position in the window on the "Settings" tab, so that the

arrangement in the window on the "Settings" tab matches the

physical arrangement of your configuration.

Table of Contents