Barco Nio Fusion 4MP Getting Started Manual page 26

Hide thumbs Also See for Nio Fusion 4MP:

Table of Contents

Connecting the signal cables

Connect the signal cables:

• For Single View mode, connect one end of a DVI cable to any of

the DVI inputs of the display (4) or (5). Connect the other end of

the DVI cable to the DVI connector of the graphic board.

• For DuoView mode, connect Head1 of the graphic board to the

"left" DVI connector (5) and connect Head2 to the "right" DVI

connector (4).

Note: When connecting a plug-and-play graphic board: After

connecting the cables and starting up the display, make sure to

select the proper setting in the Preferred Input function, in the

Settings on-screen menu. After changing this setting, you must

reboot the PC so that the graphic board adapts to the new setting.

• Connect the display's USB upstream connector (6) to a PC USB

downstream connector by means of a USB cable.

• Connect any USB device to one of the display's USB downstream

connectors (7).

• Connect the DC power input (9) of the display to the supplied

external DC power supply. Connect the other end of the external

Figure 6: Signal cable connections

Table of Contents