Websupervisor - ComAp InteliSys NTC Basebox Communications Manual

4.3 WebSupervisor

WebSupervisor is web based system designed for monitoring and controlling ComAp controllers via the
internet. This system offers a number of beneficial features that help optimize revenue for machinery fleets, as
each piece of equipment can be individually monitored for all important operation values.
Controllers
Controllers
Connection applicable
Available ports
More info
Controllers
Connection applicable
Available ports
WebSupervisor connection settings
Connection of controllers with direct Ethernet port can be realized two diferent ways:
Internet connection via AirGate: No fixed and public IP address is needed. Connect and set the controller
the same way as for
Internet connection without AirGate: Controller has to have fixed and public IP address. Connect and set the
controller the same way as for
Connection of all controllers can be realized using IB-NT external bridge.
IGS-NT Communication Guide
Image 4.3 AirGate connection screen
IG-NT-BB IG-NTC-BB
YES YES
external
bridge IB- ETHERNET
NT
IG/IS/IM-NTC-BB - Communications (page 12)
IG-NT
YES
external bridge IB- external bridge IB-
NT
Internet connection via AirGate (page
Direct PC connection to Single gen-set (page
IS-NTC-BB
YES
ETHERNET
IG-NTC IS-NT-BB
YES YES
external bridge IB-
NT NT
49).
IM-NTC-BB IM-NT-BB
YES YES
external
ETHERNET bridge IB-
NT
IM-NT
YES
external bridge IB-
NT
24).
52