Internet Connection Via Cellular Network; Connection Via Internet Bridge Ib-Nt; Active Call - ComAp InteliSys NTC Basebox Communications Manual

4.5 Internet connection via cellular network

4.5.1 Connection via Internet bridge IB-NT

What is InternetBridge-NT?
InteliBridge-NT is a communication module that allows connection of a single controller as well as whole site to
the Internet or Local area network. The connection to the Internet can be via built-in cellular modem supporting
2G and 3G networks or Ethernet cable. For 4G network please use InteliBridge-NT 4G.
The module can be used for controllers from following product lines: IG-NT, IS-NT and IC-NT.
Note: For proper operation it is necessary to update the controller firmware to a version which supports IBNT.
For IG-NT and IS-NT standard branch the first version supporting IB-NT is 2.6. For more information about IB-
NT read IB-NT Global
Features
Direct ethernet connection to ComAp PC programs
AirGate® support
SMTP protocol for sending of active emails from the controller
HTTP protocol for web-based monitoring and adjustment
MODBUS/TCP server
SNMP protocol

4.5.2 Active Call

Function
When active calls are activated for alarms on site (warning, shut-down...) the controller calls to the preselected
telephone number and sends the ANT archive file.
Software (e.g. InteliMonitor) on the PC side must be running and waiting for active call.
Controllers
Controllers IG-NT-BB
Connection
YES
applicable
Controllers
Connection
YES
applicable
IGS-NT Communication Guide
Guide.
IG-NTC-BB
YES
IG-NT IG-NTC
YES
IS-NTC-BB IM-NT-BB
YES YES
IS-NT-BB
YES
IM-NTC-BB
YES
IM-NT
YES
58