ComAp InteliSys NTC Basebox Communications Manual page 151

MSB1 LSB1 MSB2
(*) (*) (*)
235 0 0
234 0 0
233 0 0
232 0 0
231 0 0
230 0 0
229 0 0
228 0 0
227 0 0
226 0 0
225 0 0
224 0 0
223 0 0
222 0 0
221 0 0
220 0 0
219 0 0
218 0 0
217 0 0
216 0 0
215 0 0
214 0 0
213 0 0
212 0 0
211 0 0
210 0 0
209 0 0
208 0 0
207 0 0
206 0 0
205 0 0
204 0 0
IGS-NT Communication Guide
LSB2
(*)
This error is reported by iG-MU module (Modem Bridge) in the case of a
connection failure between the module and the addressed controller. The
8
terminal can evaluate this error as a communication timeout with the
controller.
8 Write cannot be performed – periphery not responding.
8 Write cannot be performed – setpoint nonexistent in any periphery.
8 Bad access code for communication from a remote terminal.
Invalid controller address: value out of range 1 to 32 or already used. This
8
error is a reaction on communication object. Object 24537 write.
8 Error in definition for communication oscilloscope objects.
Undefined action. A reaction on communication object. Object 24521
8
write.
Action (although defined) cannot be performed. A reaction on
8
communication object. Object 24521 write.
8 Written object value is not acceptable.
8 No more free slots.
8 No connection.
8 Locked, block reading is active.
8 Locked, commanding is active.
8 Locked, the history reading is active.
8 Locked, the programming is active.
8 Communication error.
8 Request for – data.
8 Request for – SMS.
8 Request for – email.
8 Request for – mobile email.
8 Request for - fax.
8 Wrong access code, the connection must be terminated.
8 Reserved for HW key.
8 Reserved for DENOX.
8 Unsufficient access rights.
8 The request can be submitted only by the administrator (User 0).
8 The administrator has entered a wrong user identification number.
8 Not possible to write, the communication object has forced value.
8 The administrator requests an unsupported operation.
8 Selected communication mode doesn't allow required interface.
8 Selected interface doesn't allow required communication mode.
HW data flow control for modem communication. Sending as answer to
8
request to read 24437 communication object.
Meaning
151