Setting The Current Time - Datascope Accutorr Plus Service Manual

Setting the Current Time

5.7

Setting the Current Time

1. Press and hold the TIMER/TEMP key for 6 seconds. The hour digit only displays.
2. Press the UP or DOWN ARROW key to change the number.
3. Press the TIMER/TEMP key to activate the minute display.
FIGURE 5-6 Hour Display
NOTE:
4. Press the UP or DOWN ARROW key (12 or 13) to change the number. Continue
FIGURE 5-7 Minute Display
5 - 18
The Accutorr Plus always displays time in a 24
hour format.
pressing the TIMER/TEMP key and the ARROW keys to set the month, day, and
year (in that order).
0070-10-0691
Calibration
Accutorr Plus Service Manual