Activating Holiday Programs For All Zones; Heating Circuit Configuration - DeDietrich EVODENS PRO Series Installation And User Manual

9.3

Activating holiday programs for all zones

Tab.65 Holiday program settings
Parameter
Start date holiday
End date holiday
Wished room zone temperature on holiday period
Reset
9.4

Heating circuit configuration

Tab.66 Menu to configure a heating circuit
Icon Menu
Scheduling
Manual
Short temperature change
Holiday
Antifrost
Set Heating Activity Temperatures
Zone configuration
Tab.67
Extended menu to configure a heating circuit
Menu
Short temperature change
OperatingZoneMode
Manu ZoneRoomTempSet
Heating Schedule
Set Heating Activity Temperatures
ZoneTimeProg Select
Holiday Mode
Zone friendly Name
Icon display zone
OperatingZoneMode
7725131 - v.01 - 06062019
If you go on holiday, the room temperature and domestic hot water
temperature can be reduced to save energy. With the following procedure
you can activate the holiday mode for all zones and domestic hot water
temperature.
1. Select the tile [ ].
2. Set the following parameters:
Description
Set the start time and date of your holiday
Set the end time and date of your holiday
Set the room temperature for the holiday period
Reset or cancel the holiday program
For every heating circuit there is a quick user settings menu available.
Select the heating circuit you want to configure by selecting the tile [
[ ], [ ], [ ], [ ], [
Function
Set the scheduling mode and choose a timer program already created
Set the manual mode; the room temperature setpoint is set to a fixed setting
Set the temporary mode; the room temperature setpoint is changed tempora­
rily
Set the start and end date of your holiday to lower the room temperature set­
point.
Set the frost protection mode; the minimum room temperature protects your
system from freezing
Set the room temperature setpoint for each activity of the timer program.
See: Timer program to control the room temperature, page 71
Access the settings for the configuration of the heating circuit.
Zone configuration
Function
Change the room temperature temporarily, if required
Select the heating operating mode: Scheduling, Manual or Antifrost
Set the room temperature manually to a fixed setting
Create a timer program (up to 3 programs allowed). See: Creating a timer
program, page 71
Set the room temperature for each activity of the timer program
Select a timer program (3 options)
Set the start and end date of your holiday and the reduced temperature for
this zone
Create or change the name of the heating circuit
Select the icon of the heating circuit
Read the current operating mode of the heating circuit
] or [ ]
9 User instructions
],
AMC Pro 69