Increasing The Domestic Hot Water Temperature Temporarily; Changing The Comfort Hot Water Temperature; Switching The Central Heating On Or Off; Changing The Display Settings - DeDietrich EVODENS PRO Series Installation And User Manual

9 User instructions
9.7

Switching the central heating on or off

9.8

Changing the display settings

Tab.72 Display settings
System Settings menu
Set Date and Time
Select Country and Language
Daylight Saving Time
Installer Details
Set Heating Activity Names
Set Screen Brightness
74 AMC Pro
1. Select the tile [
2. Select Scheduling.
3. Select DHW timer program Schedule 1, Schedule 2 or Schedule 3.
9.6.3 Increasing the domestic hot water temperature
temporarily
Regardless of the operating mode selected for domestic hot water
production, it is possible to increase the domestic hot water temperature
for a short period. After this period the hot water temperature decreases to
the Reduced setpoint.
Important
The domestic hot water temperature can only be adjusted in this
way if a domestic hot water sensor is installed.
1. Select the tile [
2. Select Hot water boost.
3. Set the duration in hours and minutes.
The temperature is increased to the DHW comfort setpoint.
9.6.4

Changing the comfort hot water temperature

You can change the comfort hot water temperature in the timer program.
1. Select the tile [
2. Select DHW comfort setpoint: The DHW temperature when the hot
water production is switched on.
3. Set the comfort hot water temperature.
You can also change the reduced hot water temperature via:
configuration > Domestic Hot Water Setpoints > DHW reduced setpoint:
The DHW temperature when the hot water production is switched off.
You can switch off the central heating function of the boiler to save energy,
for example during the summer period.
1. Select the tile [
2. Select CH function on.
3. Select the following setting:
3.1. Off to switch off the central heating function.
3.2. On to switch the central heating function on again.
Important
Frost protection is not available when the central heating function
is switched off.
1. Press the button.
2. Select System Settings
3. Perform one of the operations described in the table below:
Settings
Set the currrent date and time
Select your country and language
Enable or disable daylight saving time
Read out the name and phone number of the installer
Create the names for the activities of the timer program
Adjust the brightness of the screen
].
].
].
].
.
Zone
7725131 - v.01 - 06062019