Table of Contents
Advertisement
6 Settings
Tab.25
Type of access
Direct access: from the main home screen
Quick access: from any screen
Fig.16
Program 1
Monday
06:00
Confort 22.0°
22:00
Reduced 16.0°
MW-5000950-1
6.5
Periods of absence or going on holiday
24
CFU
3. Set the desired temperature using the
4. Go back to the main screen by pressing the back key
6.4.4
Activating and configuring a timer programme for
domestic hot water production
A timer programme can be used to vary the domestic hot water
temperature depending on activities during the day.
This can be programmed for each day of the week.
1. Go to the desired menu:
Access path
→ Select the page corresponding to the required zone
→ Select: Time programmes
Not available
Three timer programmes are available. The programme that is
currently active is marked with a tick.
2. Select DHW timeprog. select to activate another timer programme.
3. Select the programme to be modified:
Schedule 1
Schedule 2
Schedule 3
The programmed activities for Monday are displayed.
The last activity of the day remains active until the first activity of the
following day.
4. Select the day to be modified.
5. Carry out the following actions according to your needs:
Modify the timings for programmed activities.
Add a new time range.
Delete a programmed activity.
Copy programmed daily activities to other days with Copy to other
days.
Tab.26
Example of a timer programme
Start of the period
(can be set)
06:00
08:00
- - -
- - -
- - -
- - -
6. Go back to the main screen by pressing the back key
In case of prolonged absence, the room temperature and domestic hot
water temperature can be reduced to save energy. To do this, activate the
System holiday mode operating mode for all zones, including for domestic
hot water.
selector.
Name of assigned
Assigned tempera
activity (can be set)
ture (for information)
ON
55 °C
Reduced
14 °C
- - -
– –
- - -
– –
- - -
– –
- - -
– –
7740500 - v02 - 12022021
.
.
Advertisement
Table of Contents
