Inserting A Pc-Card - Baer DLX User Manual

11.3

Inserting a PC-Card

Figure 48, Inserting a PC-Card
Please ensure that you always insert the side of the PC-Card with the con-
nector into the PC-Card slot. Also ensure that the guiding grooves on the
card match those of the slot, as shown in the above picture. The PC-Card
is guided in the slot by two guide rails that prevent the card from twisting.
Slide the card into the slot and press carefully until the PC-Card reaches
the final position (PC-Card and ejection button are aligned, see arrow ).
After inserting the PC-Card it needs to be activated by the DLX in or-
der to use it for storage purposes.
The display will show the symbol " " in position 18 of line 1 after the card
has been inserted and successfully activated by the DLX unit.
If the card is not activated by the unit, the symbol will blink and the display
will show the message "PC Card is not activated!".
91