Connector X3 (Pulse Inputs 1-6, Outputs 1-4); Figure 20, Connector X3 - Baer DLX User Manual

5.4.4

Connector X3 (Pulse inputs 1-6, outputs 1-4)

Terminal type:
Function:
Types of inputs / outputs: 6 input modules (IES, IEW, IED, signal current)
Terminal Description
1 Pulse input
2 Pulse input
3 Pulse input
4 Pulse input
5 Pulse input
6 Pulse input
7 Pulse input
8 Pulse input
9 Pulse input
10 Pulse input
11 Pulse input
12 Pulse input
Freely programmable outputs
13 Electronic output
14 Electronic output
15 Electronic output
16 Electronic output
17 Electronic output
18 Electronic output
19 Electronic output
20 Electronic output

Figure 20, Connector X3

When IED (bi-current / bi-polar) Modules are used, then the signal
conditioning must be adjusted by means of the programming soft-
ware "DLXPARA".
When using mixed types of pulse inputs, the IES type modules are lo-
cated at the left hand side.
Combicon MSTB2,5/10-ST-5,08 (Phoenix),
2 per input / output card
Inputs (In1 to In6, terminal 1 to 12)
Electronic outputs (Out1 to Out4, terminal 13 to
20)
4 output modules (solid state IAW el., max.
250V/100mA)
In1–
In1+
In2–
In2+
In3–
In3+
In4–
In4+
In5–
In5+
In6–
In6+
Out1–
Out1+
Out2–
Out2+
Out3–
Out3+
Out4–
Out4+
IN1
IN2
IN3
IN4
IN5
IN6
OUT1
OUT2
OUT3
OUT4
47