Deactivate Pc-Card - Baer DLX User Manual

Table of Contents

Advertisement

During the activation of a PC-Card..
The display will first show the message "Card will be erased on first activa-
tion. Continue = ENTER". Press the
the PC-Card. The LED labelled "M" will be lit and the display will show the
message "PC-Card is being activated... DO NOT REMOVE !!". Once the
formatting is complete, the display will show the message „Card is ready for
recording DO NOT REMOVE !!" and the LED labelled "M" will go out.
If the PC-Card cannot be activated, a corresponding message will be show,
such as:
Card is not present!
Card is write protected!
Wrong card type!
Card too small!
Card changed!
In this state the LC display will blink with a one second frequency.
7.9.3

Deactivate PC-Card

How to get there
Press the
the
Password protection
The function "Deactivate PC-Card" can be activated with either the pass-
word for PARAMETERS or the password for PC-CARD. After entering the
correct password (see "Password input" on page 56) the function will be
executed.
Why do you have to deactivate a PC-Card ?
When deactivating a PC-Card, the recording of information on the card will
be terminated, the administration information will be updated and the virtual
interface between the DLX unit and the PC-Card will be deactivated. If the
PC-Card is removed from the DLX unit without deactivating it, then the ad-
ministration information is incomplete and the PC-Card cannot be read by
other software.
During the deactivation of a PC-Card..
The LED labeled "M" will be lit and the display will show the message „Up-
dating admin. Information DO NOT REMOVE!!". Once this action is com-
plete, the LED labeled "M" will go out and the display will show the
message "Card has been deactivated. Please remove NOW!!".
74
Please insert again AT ONCE!!
Please UNLOCK!!
Try ANOTHER card!!
Try ANOTHER card!!
Please insert previous card again!!
-key twice when in menu item "Maintenance" and then press
key. The function "Deactivate PC-Card" is password protected.
key to confirm the formatting of

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents