Table of Contents
Advertisement
7.9.1
Set time
How to get there
Press the
time" is password protected.
Password protection
The function „Set time" can be activated with either the password for
PARAMETERS or the password for SET. After entering the correct pass-
word (see „Password input" on page 56) the function will be executed.
What can be done ?
You can set the date and time of the internal real time clock of the DLX unit.
Setting the time
You can set the day (DD), the month (MMM), the year (YYYY), the hour
(hh) and the minute (mm), one after the other. Use the
change the selected value (increase or decrease). Use the
confirm your input and to move to the next value.
Press
unit. The value for the seconds will be set to zero.
Press the
„Maintenance" without altering the date and time of the unit.
7.9.2
Activate PC-Card
How to get there
Press the
the
key. The function "Activate PC-Card" is password protected.
Password protection
The function "Activate PC-Card" can be activated with either the password
for PARAMETERS or the password for PC-CARD. After entering the cor-
rect password (see „Password input" on page 56) the function will be exe-
cuted.
Why do you have to activate a PC-Card ?
If you do not activate the PC-Card, the DLX unit cannot write to the PC-
Card. By activating the PC-Card the virtual interface between the DLX unit
and the PC-Card will be activated and the PC-Card will be prepared for
data storage.
-key when in menu item "Maintenance". The function „Set
key after setting the minute value to set the time into the DLC
key to exit the function and to return to the menu item
-key once when in menu item "Maintenance" and then press
and
keys to
key to
73
Hide quick links:
Advertisement
Table of Contents
