Baer DLX User Manual page 141

901 -08 Use device status of a registration period to mark status changes of logic inputs
Table value:
Example:
Expl.:
901 -09 Device identifier
Table value:
Example:
Expl.:
-10
901 Time and Summertime bit in the device status of the registration period
Table value:
Example:
Expl.:
-00
902 Currently active rate (demand, energy, from version 1.04.00 and up)
Table value:
Example:
Expl.:
-01
902 Current reset indices (Cnt12 and Cnt99, from version 1.04.00 and up)
Table value:
Example:
Expl.:
-02
902 Position of the program protection switch (from version 1.04.00 and up)
Table value:
Example:
Expl.:
Z: Flag
0: Bit0 in the device status of a registration period is always 0
1: Bit0 in the device status of a registration period is set to 1, if the
state of a logic input has changed during that registration period..
Bit0 in the device status of a registration period is always 0
D D D D D
Device identifier
1 2 3 4 5
The device identifier is 1234567890123456.
S: Summertime flag
0: correspond to the state at the end of the registration period (DLX
standard)
1: correspond to the state during the registration period
DLX standard
E: energy rate
M: demand rate (maximum)
Energy rate 1, demand rate 3
ct ct : external reset index (1 to 12), can be set using DLXPARA
12 12
ct ct : internal reset index modulo 100 (0 to 99)
99 99
01: current month (e.g. January);
12 resets have occurred since the last unit restart.
f-Flag:
0: Programming is disabled
1: Programming is enabled
Programming is enabled
D D D D D D
6 7 8 9 0 1
E
1
ct ct
12 12
0 1
Z
0
D D D D D
2 3 4 5 6
S
0
M
3
ct ct
99 99
1 2
F
1
A 31