Baer DLX User Manual page 119

000 -06 Reserved for future use
Table value:
Example:
Expl.:
000 -07 Synchronization mode
Table value:
Example:
Expl.:
000 -08 Synchronization window surrounding the end of a registration period
Table value:
Example:
Expl.:
000 -09 Synchronization tolerance: if the synchronization changes the system time by
more than this number of seconds, it will be marked in the device status (this
table address exists for version 1.04.01 and up)
Table value:
Example:
Expl.:
000 -10 Rate control mode
Table value:
Example:
Expl.:
109 -rr Reset index and corresponding timestamp
Table value:
Example:
Expl.:
U: Flag
Reserve
S: Synchronization flag
0- Synchronization not possible
1- SYNC input active
2- Synchronization via radio clock receiver
Synchronization is done via SYNC input
FF: Length of the synchronization window in seconds
Exception: if the value is 0, synchronization can happen at any time
Synchronization is possible in a window of ±9 seconds at the end of the
registration period
TT: Synchronization tolerance
Note: If the value is 0, synchronization is never marked in the device sta-
tus
If synchronization changes the system more than 2 seconds, the event
will be marked in the device status.
T:
0- Rates are controlled by control inputs
1- Rates are controlled by the tariff calendar
Rates are controlled by control inputs
rr: requested reset (rr:=00 to 99):
00 last reset
01 second last reset
... and so on
n n M M
nn: internal reset index (nn:=01 to 12)
MM-DD: Month - Day
hh:mm: hour : minute
0 1 0 3
The reset with index 01 took place on 15. March at 10:00.
- D D h
- 1 5 1
U
0
S
1
F F
0 9
T T
0 2
T
0
h : m m
0 : 0 0
A 9