Registration Period - Baer DLX User Manual

3.6.4

Registration period

The registration period is the period of time used to calculate demand val-
ues (and energy increment values). At the end of a registration period, the
current value of the maximum demand registers will be stored. Subse-
quently the maximum demand registers will be set to zero. Two independ-
ent registration periods can be defined:
•
Registration period Tm1:
"Billing registration period" programmable in steps of 1, 2, 3, 4, 5, 6, 10, 12,
15, 20, 30 and 60 minutes.
•
Registration period Tm2:
programmable in steps of 1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30 and 60 minutes
as well as 2, 3, 6, 12 and 24 hours; if not required, this registration period
can be disabled;
registration period Tm2 can be programmed to the same value as Tm1.
Calculation of maximum demand values and billing data (see page 25) only
takes place for registration period Tm1.
28