Set Cumulative Counter; Initiate Maximum Reset - Baer DLX User Manual

7.9.4

Set cumulative counter

How to get there
Press the
press the
protected.
Password protection
The function "Set cumulative counter" can be activated with either the
password for PARAMETERS or the password for SET. After entering the
correct password (see "Password input" on page 56) the function will be
executed.
What can be done?
You can modify the cumulative initial counter value for all inputs (I) and for
all total registers (S).
How to do it
Use the and
unit (S01 + to S04-). Then press the
rate selection. Use the
or the rateless register). Now press the
the register value. Use the
digits for version 1.04.00 and higher) and the
put and to move to the next digit. Use the
any stage.
7.9.5

Initiate maximum reset

How to get there
Press the
press the
protected.
Password protection
The function "Initiate maximum reset" can be activated with either the
password for PARAMETERS or the password for RESET. After entering
the correct password (see „Password input" on page 56) the function will be
executed.
Executing a reset
The function will store the maximum demand values (together with the date
and time of occurrence) as well as the cumulative and the current counter
values. The display will show the message "Reset is being executed". for a
couple of seconds. Afterwards the display returns to showing the standard
display. The first line will now show the symbol " " for the duration of the
reset blocking time.
-key three times when in menu item "Maintenance" and then
key. The function "Set cumulative counter" is password
keys to select the inputs (I01 to I16) or the summation
and keys to select the desired rate (rate 1 to 4
and
-key four times when in menu item "Maintenance" and then
key. The function "Initiate maximum reset" is password
key to move the cursor to the
key to move the cursor to
keys to modify the individual digits (9
key to confirm your in-
key to abort the function at
75